undefined

points

[-]

It's why plumbers use $25 sharkbite fittings now instead of soldering in a $2 copper fitting. But of course the sharkbite relies on a rubber O-ring and will probably leak in 10 years, the plumber will be long gone or the property probably under new ownership who don't remember.

by giardini3 hours ago|

parent|

[-]

Softalker is right-on in his warning:

We usually have a few freezes in the winter and some homes' pipes freeze. I was surprised, in speaking to a plumber, to find that pipe clamp installation had come to dominate the repair market (as opposed to repairing/replacing the leaky pipe).

In his first year this plumber had arrived at the plumbing supply house to find all pipe clamp orders backlogged two weeks! He thus determined to, during the warmer months, stockpile a cache of pipe clamps for the coming winter.

Furthermore, as SofTalker states, the fitting is usually left in-place instead of being replaced! Yet one more reason to have a prospective home inspected by someone who is very knowledgeable.

by Animats45 minutes ago|

parent|

[-]

Automated radial welding for pipes seems to be slowly reaching small, plumbing-sized pipes.[1] This has been around for years for larger pipes, but the equipment is now down to home plumbing diameters. Still too expensive, though, at around US$10,000.

[1] https://www.youtube.com/shorts/Jr1TZW8dKCw

by giardini8 minutes ago|

parent|

[-]

That's very nice but I doubt it will replace pipe clamps in ease of installation and cost in a real-world repair environment. Many leaks in say steel galvanized water pipes are the result of corrosion. Pinhole leaks form, then more and then enough water leaks to be noticed on either exterior or interior wall. Jose the Plumber will leave his radial welder in the shop (b/c power is out anyway in the affected area and he doesn't carry a generator on his truck) and reach for his box of pipe clamps. Problem solved and on to the next job.

by ErroneousBosh10 hours ago|

prev|

[-]

Yeah. I mean I just had some concrete slabs laid to put a bike shed on (literally bikeshedding, the colour is green, that's what it comes powdercoated in from the supplier, take it or leave it).

It was 300 quid.

I could not buy the materials for 300 quid.

Two guys showed up with eight slabs, half a tonne of Type 2 and half a tonne of sand, and then the next day the landscaper showed up and did about six hours of work to dig it all out, fill it all in, and put the slabs down.

It's absolutely perfect, exactly how I wanted it, and it would have taken me a couple of days and cost far more - and I'm quite good at that kind of stuff, it's just not what I do all day every day so the landscaper will be far better at it.

by jimnotgym1 hours ago|

parent|

[-]

My experience when i was in the trade is very few people know what perfect looks like, and so are perfectly willing to forego decent workmanship in favour of cheap. One of the reasons I left the trade, you could make more money doing a bad job, and I had no desire to do that.