Do we do this for every new version and combination of versions for USB? USB-PD? Thunderbolt? DisplayPort?
(And yes, I don’t need to look it up. But also I’m extremely familiar with the USB spec and have been tangentially involved with the USB-IF)
The best you can get is TB5 (240W, up to 120 Gbps data transfer) and at 1m long they’re $32 or so from CableMatters. Those are admittedly somewhat thicker, but not stiff.
I wish there was a higher baseline data transfer mandated for usb-c. Sure, 40gbps isn’t needed for all cables, but is some piddly 5gbps too much to ask? We had usb 2.0 speeds back when CPUs just barely entered 1 GHz range, it’s practically ancient technology. Admittedly most people never transfer any data over usb, but with this logic we might as well have usb-c that does charging only. Being able to pick any cable and have 5 gbps baseline means that any usb-c cable is fundamentally usable, if slow. 480 mbps is… ugh.
I don’t have an issue with 60W being the baseline, it’s enough for most laptops and the average GaN charger is 65 W (or less) anyway.
5gbps means you add 8 additional wires to every cable, and also would require that both devices on each side implement 5gbps PHYs for their USB (if you mandated it on devices too). It’s a large cost, especially when you’re talking about billions of cables.
Then USB is forever frozen in time, unless we start using new connectors.
This was the tradeoff we got when standardizing on one connector. The protocol versions change (USB, USB-PD, Thunderbolt), the cables that go between each connector change based on the needs of the spec they supports. But the connectors stay the same.
In my opinion, this was a poor tradeoff and now we’re living in the hell we asked for.
If you want every cable to support the latest and greatest of whatever exists as of right now, you can do that. By all means, buy Apple’s USB-C Thunderbolt 5 cables. They’ll run you $70 apiece but you’ll be buying a cable that makes no compromises.
My personal approach is to just use whatever cable came with the device for anything for which that’s convenient and plausible. For mobile devices with relatively limited charging speeds over USB-PD and for which portability and durability are typically important, I buy the latest Apple woven cables. For high-bandwidth devices I spend the big bucks on the Apple Thunderbolt 5 cables. I discard any cables of unknown provenance.
the problem comes when the device and cable get separated, and the cable is "helpfully" organized into the bin with the rest of the USB-c cables.