Rule 1. You can't tell where a program is going to spend its time. Bottlenecks occur in surprising places, so don't try to second guess and put in a speed hack until you've proven that's where the bottleneck is.
Rule 2. Measure. Don't tune for speed until you've measured, and even then don't unless one part of the code overwhelms the rest.
Rule 3. Fancy algorithms are slow when n is small, and n is usually small. Fancy algorithms have big constants. Until you know that n is frequently going to be big, don't get fancy. (Even if n does get big, use Rule 2 first.)
Rule 4. Fancy algorithms are buggier than simple ones, and they're much harder to implement. Use simple algorithms as well as simple data structures.
Rule 5. Data dominates. If you've chosen the right data structures and organized things well, the algorithms will almost always be self-evident. Data structures, not algorithms, are central to programming.
https://web.archive.org/web/20260314210910/https://users.ece...
So you agree that they should've designed the system to use the appropriate data structure from the beginning?
Genuine question, is software performance really linear like that, that one can and should only fight the tightest bottleneck, one workload at a time? Never really sounded right.
It also sounds like the typical sleight of hand where the difficult bit is simply laundered a layer up, in this case the choice of what workload one investigates.
Sometimes it's a lot of small things everywhere and you can pick up significant performance after a lot of small value fixes. In this case, caching wire data instead of structured data is almost one of these, because the contribution to response time for serving a cache hit is small... otoh it happens so often than a small improvement matters; but this is a pretty focused use case, you usually hit the many smalln improvement issue in a less focused application where there are many code paths.
Sometimes the whole code structure / data structures are so wrong, but it works and perf is bad and profiling will never tell you. This article is not that case; these data structures only needed refinement.
At the point someone queries the 100TB of RAM, then maybe it is worth revisiting but even that has risks. You have to design the migration path, have fallback mechanisms etc.
So how would you decide which path to take in situations like this?
if you spend cycles on nitty gritty opinions like this time to market goes out further and further out. some napkin math, 130 gen13 servers cost "only" ~$2.6M. relative to the importance of the 1.1.1.1 and the market at the time. that is nothing to cloudflare.
this is not to say good system design does not matter. it very much does, but making that call at that time would've butchered the prodcut very much similar to google+, youtube etc.
It's also not nothing, otherwise it would never be optimized away now, but left as is. After all, wasting time on optimization delays "time to market" for other useful features.
I also don't get the reference to YouTube, it's a very successful product, how was it butchered by good system design???
You're tasked with making a DNS caching recursive resolver that can operate at a large scale and will be run on thousands of servers each of which has a lot of GBs of ram.
You are given some period of time to build this and make it production ready. How do you spend your time:
* Focusing on making sure that the resolver works correctly?
* Focusing on make sure that it actually provides improved DNS performance for internet users?
* Handles an very large number of record requests/s?
* Saves a few GB of ram per server?
There are tradeoffs to consider. RAM is cheap, even at today's prices RAM is not the most expensive thing that can go wrong in such a scenario. Having the responses be slow or incorrect is a far more expensive problem. A good engineer would pick a simple data structure that has the right shape but might not be optimal in footprint to focus on correctness and response time. The few extra GBs of RAM per server can be dealt with later.
When building things at scale you want to make sure it works correctly, fails correctly, and does the thing quickly before worrying about reducing resource consumption. I've never seen a project fail on Vec<T> vs Box<[T]> memory differeneces, or even on a few GBs of RAM usage per instance. I have seen them fail on "one wierd corner case of correctness" though, and on poorly thought through failure modes.
Doesn't this also inform you that your cache will be very large, so you shouldn't use growable structures with slack space when cache entries won't grow; slop space reduces the size of your cache. And also that the query volume will be high so the cached data should require as little work as possible before returning data; spending time marshalling response data on every cache hit increases response time and decreases capacity.
* unbounded growth of the cache and properly invalidating after TTL expires (a few GBs of slop is nothing on a server with 64 or more GBs of ram, unbounded growth is a problem).
* making sure the DNS implementation works correctly on both the serving side and recursive resolution side.
* What strategy is best for deduping recursive requests across machines (if something a few miliseconds away has a live result, why do a full lookup taking hundreds or thousands of milliseconds?). This potentially improves RAM usage across the datacenter too from not having a given record on dozens (or more) machines' local cache. I don't know exactly how they do it, but naively I'd look at some sort of DHT shaped solution to look for records in peers within the datacenter. Or maybe some sort of tiered caching with the upper tier being sharded on domain name or the like.
* The biggest performance gains cloudflare can provide in Web and DNS cache come from a cache hit. This is on the order of 10s or 100s of ms due to having a big cache and short distance to the requesting machine. A suboptimal lookup algorithm that is a few microseconds slower in local compute and ram access is just not as important as the other concerns for dedup and cache sharing. That's not to say it's unimportant, just that it's not the top priority when you're trying to deliver this much larger performance gains from other aspects of the system. Thats why they are getting to it several years after release.
Cloudflare writes a lot about distributed systems solutions to various problems. They likely don't think as hard about single machine performance as much as whole datacenter performance when approaching problems.
Keep in mind that the per-server cost of the whole program pre-optimization seems to be about 10GB (from the graph in the post). IME that's not bad for a big busy caching service.
Using twice as much ram per cache entry makes the cache half as large, assuming your cache is bounded by ram, unless the queried, unexpired result set is less than the ram budget (which I would tend to doubt... lots of randomized queries out there; maybe I'm wrong if the cache size dropped).
When you're storing billions of records, it makes sense to spend a few minutes to consider how they're used and make a good choice about how to store them.
When you're getting a cache hit tons of times per second, it makes sense to consider every step and which ones don't need to happen every time. You have to consider every step while you're pursing correctness anyway, so might as well have the performance lens active too.
I'm not asking for heroic optimization: I didn't ask for vectorized stuff or kernel/nic offloading or kernel bypass networking... Just you have to use some data structures, you might as well not use ones that are expensive for features you don't need; and you have to store something in your cache, you may as well store something that requires less munging on the way out.
If this were a small local cache, that didn't want to use something already existing like unbound for some reason then yeah, data structures don't make a huge difference, extra marshalling doesn't make a huge difference, just don't reimplement all the CVEs that BIND had in the 90s. But if you're going to allocate 100 TB of ram, make it count. Even if you do use twice the ram but you get value from it, maybe that's fine... I've run wacky systems with bloated storage when there was a benefit. Vec doesn't give any value over a Box<[]> in this case; convenience or lazyness would be fine except that the sheer number of objects makes it worth the few minutes it takes to do something better.
Another interesting thing that happens is you don't necessarily know what form your actual optimizations will need to take. Later when your systems grow you discover the suboptimal parts you hadn't optimized for.
Very early on at Cloudflare I worked on part of the DNS infrastructure that took DNS records from the UI and got them in a state for actual authoritative serving. The system had been constructed anticipating Cloudflare having millions of customers with unique domains, but it had not been constructed for a single customer with a single domain with millions of records. This caused a periodic slow down in DNS record updating while the system churned on that one customer.
In a different job I worked on a piece of optimization software that needed to keep track of "node" A is reachable from node "B". This had been implemented as a matrix (literally a malloced NxN matrix of ints storing 0 or 1) which worked really well for small systems. But you'd be out of memory really fast on a large project. I replaced the matrix with a hash table and all was good because the matrix was actually really sparse.
With a rather short prompt, claude/codex will take your code, write a harness, profile it, build experiments, profile those, and give some pretty solid advice which one to pick. Then integrate the changes. It's the kind of goal-directed, bite-sized job that LLMs excel at. Extremely low-commitment.
Except for the whole "making changes in production at scale" problem, of course.
The “evil” of premature optimization is that it’s a misapplication of priority. If I have an acute medical problem that needs attention, it’s not the right time to talk about chloresterol and statins, get my broken leg set.
There’s always a tension between engineering management who needs to deliver a solution to the business and engineers who want to deliver a beautiful object.
Because anyone willing to come in just to design your cache format is going to expect payment that is many multiples more than the engineers you already cannot afford? Long-term employees cost less, which brings them closer to being affordable, but you have to be able to keep them busy for long periods of time to realize that reduction in cost. A engineer who doesn't understand your codebase isn't going to be useful for very long.