> 5 pilots were in the cockpit of this flight. In addition to the normal crew of pilot-in-command and co-pilot, there was an experienced relief pilot and two additional check captains; one was being trained as a check captain (CC) and the supervising CC, who was training the CC.
Captain Richard Champion de Crespigny had 35 years of flying experience at the time of the incident.
That is an insane amount of flight experience in the cockpit and all of the reports state this was a very significant factor. i.e by allowing distribution of the task load, plenty of time for one of the pilots to compute landing calculations manually etc.
THe A380 is a flying tank no doubt, but it wasn't the sole factor here - I think most people would agree this one was a shared victory.
During the development of the A380, the German and French sides were using different versions of the CATIA PLM software (i.e. CAD), which prevented people from looking at a single unified model of the plane. One concrete problem it caused was major problems with the wiring harnesses, which led to a 2 year delay in the program, and 3 early A380's which couldn't be sold. (Airbus kept one for test, the other two got sent to museums)
That manifested in this accident because the wing wiring was routed through the engine disk burst axes (a hazard which is explicitly accounted for) with insufficient redundancy. That created the dangerous situation where they couldn't turn off the engine after landing.
Which is vastly preferable compared to all of the dangerous situations just prior to that landing.
They also required engine software that detected the sudden increase in speed associated with a shaft break and automatically cut fuel.
[0] - this one and https://news.ycombinator.com/item?id=49541946
> [something about london taxi drivers, admittedly unrelated]
> I totally get you and in theory you are right. And yet, in the USA you have gerrymandering and apparently _wanted_ Trump. Twice. Something has to be very wrong somewhere.
> I would suggest "lobbying" is not the correct word to describe all the corruption going on in the current USA administration cesspool.
>I recently bought a BambuLab 3D printer. Designed and made in China. Right from the unpacking to first print the experience was top Apple-style quality. Indeed I was agreeably surprised.
> A global non USA success? Plenty. You might want to remove your pink USA glasses and look around. Spotify good enough for you?
> I am Canadian. Never, ever would i knowingly buy any dairy products from the USA , at any price. We have cows too, and farmers.
> Its not that it hates its customers , as much as it it a USA-based company that is run under the rules made by the administration. Not that much different from running Red Star OS from North Korea, actually.
> [Finally something unrelated]