I wouldn't trade that time spent on my printers for anything. I wrote a post about this recently [1]

There was way more valuable things learned in the process than just making Benchy.

For years I have been trying to tell people this. The value of Reprap was not just "to have a printer".

[1] https://www.robosprout.com/thank-you-reprap-for-all-of-it/

I recently bought a Bambu Lab A1 printer. I went specifically with Bambu Lab because everything I read said that was the better choice if you want something low maintenance and easy to set up even if it’s not as open as some of the alternatives.

It’s stuck in the auto calibration stage. It gets halfway through then it stops with a generic error message. The UI around this is really clunky. I’ve tried searching online, asking Claude and nothing. I emailed customer support and they came back with cryptic instructions that assume familiarity with the internals of the machine.

I decided to leave this for a day when I wasn’t too mentally drained from work to debug issues in my free time and instead the machine has been collecting dust ever since.

Maybe it was a mistake to get a Bambi Lab? I thought it was the more turn key option but it hasn’t been my experience.

I’ve had several printers over more than a decade. Even the most reliable new units can still be difficult to debug little things. My cousin’s family got a Bambu printer with no technical or mechanical experience and gets it working well most of the time, but there are still things that can bite you like prints not sticking to the bed because it has oils on it or filament breaking in the feed path because PLA absorbs moisture from the air and becomes brittle. A modicum of attention can keep these problems in check but the operator has to do some reading and learning.

There is another set of people who are in 3D printing because they like the experience of debugging and improving the printer as much or more than the final prints they get from it. The most hardcore 3D printing people I know don’t actually print much other than 3D benchies and test towers because their fun comes from playing with the machine and trying new parts. Those people build a different set of printer types than the plug and play units used by most casual makers.

Crazy as it sounds, that’s the opposite of my personal experience.