Yea, if you go to an installer instead of buying from the OEM and installing yourself. I likely made your panels at SunSpark (We made panels for everyone, Renogy, Juinko Solar, Samsung, etc.) They were sold for $80 at 330w - 4.125 watts per dollar, or a quarter per watt.
Solar isn't expensive - you are.
I am not a commercial system installer, I am a hobbyist enthusiast who helps others install to avoid commercial installers and their costs. Volunteer labor for everything (racking, panels, electrical), volunteer electrician signs off for any AHJ (authority having jurisdiction) requirements.
Most people cannot install the equipment themselves, which leads to the residential costs I mention. Is it expensive? Price is what you pay, value is what you get. If you cannot find someone to install for free, and cannot do it yourself, the price is the price. You can either choose to pay market rate after getting multiple bids, or choose to go without.
US Dept of Energy: Solar Photovoltaic System Cost Benchmarks - https://www.energy.gov/cmei/systems/solar-photovoltaic-syste...
Energy Sage: Solar panel cost in 2026 - https://www.energysage.com/local-data/solar-panel-cost/
(i am also a community outreach volunteer for https://www.gosolarapp.org for automating permitting and remote inspections across the US, which was incubated at NREL prior to being spun out as an independent non profit; this drives down permitting soft costs)
This is highly untrue, until you get to the task mounting on a roof. Barring that, making a solar array system is dead simple. Most anyone can turn a screwdriver or build a frame or connect very distinct connectors together (they just snap together for daisy-chaining solar panels) or insert a power plug into a NEMA receptacle (for balcony solar installs.)
It is the install on the roof itself which most people cannot do (because they lack roofing knowledge.) Every other thing is absolutely DIY by pretty much anyone with hands and eyes.
Literally the most important part is what most people cannot do. If you have the space, sure, ground mount. Most people do not have the space, nor are they going to be confident in putting penetrations in their roof deck to mount racking to hold the panels.
I'm looking forward to installing a couple of panels on the roof next year. Having power to charge my phone, or laptop, won't take much capacity, I'm not going to use much power other than that, maybe some music but nothing like cooking/heating, or similar heavyweight usage. (I have a wood stove for heating, and gas/alcohol stoves for cooking, along with on-site water.)
https://www.energysage.com/news/solar-panels-withstand-hail/
- Every panel sold in the U.S. has to pass an industry-standard hail test, which fires ice balls at multiple points on the panel and requires no visible cracking, delamination, or more than a 5% drop in power output afterward. Companies like UL Solutions, an applied safety science company, test solar panels by dropping a two-inch solid steel sphere from 51 inches onto panels, simulating the impact energy of serious hail. Panels that survive without electrical hazards earn certification for real-world deployment.
- The proof is in the pudding—or in this case, the parking lot. When a severe hailstorm hammered the National Laboratory of the Rockies' (NLR) (formerly National Renewable Energy Laboratory (NREL)) Colorado campus in 2017, just one single panel out of more than 3,000 suffered damage. That's a 99.97% survival rate against Mother Nature.
It's the equivalent of a bond investment with potential subsidies at the utility, state, and federal level (solar is no longer subsidized, but batteries still are).
So long as the roof itself lasts that long. People who are mid-cycle on their existing roof should not install solar until they get to the next replacement. This is where I am, and why I do not have rooftop solar. I expect to get 15 additional years from my roof, and there's no guarantee I will have hit the break even point by then. Plus, solar installers will not warranty a mid-cycle roof against leaks, so if something goes wrong that quickly eats into your cost savings.