upvote
Correct on all counts. Static discharge is a strange way for the article (and tech on the phone) to say discharging capacitors but that's what it's doing.
reply
The problem is if you sound too smart to the customer, it's an insult to their intelligence.

Telling them "we're draining the flea power" and now the customer's freaking out they have a bug infestation and Dell has unleashed a storm of locusts upon them.

reply
Ah, the balancing act of a support tech. If you ask, "Is the device plugged in?" you are condescending. If you don't ask, you waste 30 minutes. If you ever try to help a customer avoid the problem in the future by explaining the root cause you are either condescending or overcomplicating things. So you stick to the minimum, simplest communication.

That's how you get, "Nationwide air traffic control was shutdown by a switchover from copper to fiber at a single, tiny, very remote location." And then you regret including the details "single, tiny, very remote". In the next release, you just say, "It was gophers."

reply
Never ask if it’s plugged in. Instead, walk the customer through “reseating the power cable”.
reply
The other end of the cable can the cause of issues too. Both ends need to be connected. Asking doesn’t help, and when you get there and find it unplugged it’s extremely frustrating.
reply
From experience this usually works and not just for cables, but pretty much anything.

People will also often be more willing to admit that the thing wasn't in the state it should have been in the first place. Probably because they dont feel like you are trying to accuse them of doing anything wrong.

reply
On the network side of things, the move was to flip the Ethernet cable. Accusing the customer that the Ethernet cable wasn't plugged in or seated correctly wasn't a winning thing to say, but being self-effacing and asking n the customer to flip it was a customer service "hack" (humor us) that lead to so many "suddenly" working modems I'm sure it made it into the customer service manuals.
reply
Best to drain them of power before they unionize
reply
They might also start a dixieland band and play Tiger Rag.
reply
This happens every time I need the customer to supply inverse reactive current to the synchronizing cardinal grammeters
reply
What do you do if the customer doesn't have an interocitor or a recently demultiplexed turbo encabulator?
reply
Yeah, the advice sounded similar to what I recall a Toshiba tech once telling my dad to do when his Toshiba laptop wouldn't power on.
reply
People should be warned that high power circuits can retain a deadly charge when unplugged. Until my 20s I always smirked at the lightning bolt stickers thinking how unplugging obviously makes them safe.
reply
I have a little Anker GaN usb charger cube, into which I often plug one of those flexible IKEA LED USB-C reading lights.

Every time I unplug the charger from the wall, I’m still surprised when the LED reading light stays on for an extra second or two, “unplugged”

reply
That's comforting in a way. That shows how little energy they need to function. An old incandescent shuts down immediately once you turn them off.
reply
deleted
reply