upvote
That doesn't seem to be described by the article at all.

The latency added in the monitor is described as around 8 us, completely negligible compared to any Internet connection's latency.

So the latency without the monitor should be completely irrelevant.

reply
> The reason is that if you add up the average time it takes to get the go-ahead through my monitor’s hub, which is around 7.6 µs, to the average time it takes to send 4 KB, around 8.2 µs, you can find what the maximum speed is.

This part is saying the NIC with this monitor can transfer 4 KB to the host through the USB hub every 15.8 us. You can do the math and it's about 2gbps.

Remove the hub, and reduce the delay solves the problem.

Increase the burst size would work: 8 KB per 24.0 us would be sufficient for 2.5 gbps.

Increase the burst size and the transfer rate as done with the 5 gbps adapter, and that should work out, although that one is probably going to be insufficient for full rate 5 gbps as well.

reply
Yes, that is correct. I had misunderstood which connection cibyr was referring to, see sibling post.
reply
Negligible compared to the RTT, sure. But they’re talking about the latency between when the network adaptor signals that a packet has arrived and when the CPU actually services the interrupt to tell the card to send the packet(s) to main memory. The NIC’s buffer could only hold 4 packets, so by the time the NIC got a DMA buffer to copy the packets into a fifth or sixth packet had arrived and been dropped.
reply
I see now, indeed. What cibyr posted is entirely correct.

I thought their "latency without the monitor" had referred to the overall end-to-end connection to the other IP endpoint, but they were talking about `NIC <-USB-> laptop`.

reply