Sennheiser provides replacements should you need them. The effect they have on the sound is much bigger than you might think.
Not anymore for my old 380 pro. Had to settle for aftermarket versions that feel a little softer but also sound a bit different.
- sorry just kidding. I couldn‘t resist.
Until my cat finds them.
Any serious set of wired headphones better have replaceable wires because apparently they are delicious
I've had a pair of Sony MD-7506s ever since I assisted in an analog recording studio, years ago. 7506s were the standard then, not sure about now. I am on my 5th set of cushion replacements.
A few years ago I bought a high-ish quality bluetooth adapter I can put in my pocket and walk around. The one I bought is the Boltune BT-BA001. Looks like they are only $30 on eBay now, but there may be better ones out there. That little box is probably my most used piece of inexpensive electronics.
The article prominently highlights mobile usage, in which case wireless headphones easily win on longevity.
Cables do fail though, completely. They become unusable.
In my entire life time of using headphones/earbuds since school with the PSP, ALL wired options have failed after 1-2 years for purely mechanical cable reasons. Not a single wireless failed for electronic reasons. The did fail for me dropping them and stepping on them reasons, though.
I’ve been using Bluetooth wireless headphones exclusively when I’m portable since 2006 (Sony Ericsson HBH-DS970 represent), with only wired use at a desk and I’ve never looked back.
Hopefully more Bluetooth headphone companies follow suit. Maybe we can even get a standardized battery.
What is a "Sony g shock" if you don't mind? I know Casio's G-Shock and Sony's Sports series... did you mix them by chance as I suppose or is there a Sony range I'm not aware of?
I also exaggerated the year a bit. After looking it up, I think this cd player came out in 2004!
Your soldering skill (and sense of adventure) would have to be far better than mine to even consider doing that for wireless earbuds.
The trick is to gently scrape the stranded wire with a blade for the solder to stick and to make a good connection.
You’ll need to solder it to the contacts inside the can, but that’s quite straightforward.
In case the internal cable that goes from one can to the other breaks, you can replace it with any bit of audio cable so you can use one that’s easy to solder.
Plus, the more high end ones come with repleceable cables.
I use wired at home, where I'm not cycling the connection very much.
I LOVED my Grado headphones but destroyed three pairs of them and was soldering my own ends on the cables over and over.
Honestly though you can get the best of both worlds.
I impulse bought some over-the-ear headphones at the airport when I realized I had forgotten mine that do bluetooth, but can also use an audio cable when the battery dies.
When using wired the audio quality is much better.
Isn’t it the wire that failed, not the audio part of it? So why not do what I did? You put some JB weld across that bend in the wire, which is cheap and could probably be engineered to last a lot longer… now I have headphones that last a really long time. You could also get a better connector and simply put that on there, right?
I can use them while charging my phone or working out. Can play a video while cooking and moving around the kitchen. Or while watching TV/playing a game in the TV where a cable can’t reach.
However when static I used wired. That’s mostly when on the computer, but like many people here I am assuming that’s a good part of the day.
Every pair of cheaper earphones or earbuds I’ve had fail have failed due to the cable.
We switched my oldest to a pair of BT headphones because he seems incapable of keeping track of the cord. It gets caught, he pulls, and something has to give. Longest lasting set he had in 2025 was BT.
I'm the same way as your oldest, if I'm up and moving around while wearing earbuds/IEMs I run the cable through my shirt.
Wired headphones at least if they fall out are still connected to a rope to get them back!
I just wonder if wired fans just never skip forward a song, or adjust the volume. Or even use active noise canceling.
But also, I don't think it's either/or for most people. I use both wired and wireless headphones all the time depending on the use case. Wired sounds far better and is more reliable, wireless is more mobile. Different use cases.
I can point to the shelf with my Sony wired ANC ear buds, which I bought years ago specifically for ANC during air travel, in the era when I would use my iPod and later an iPod Nano. The ones I have are the second pair, bought after the first was accidentally left on a plane. I think they were different product generations, a few years apart. These are so old, they are purely stereo headphones. Microphones for duplex audio hadn't become pervasive yet.
These stick in my ear with little silicon flanges and have a part that sits outside with the microphone. Then there is a small control module sitting at the junction of left and right ear wires, which holds a AAA battery and has a power switch and a pass-through audio button (which always seemed more gimmick than utility to me). In their active mode, they also don't demand much of the source device.
This has been a thing in wired headphones since at least 2007 lol
even some of the cheapest in-line remotes that only have a single button will let you change the track by double tapping it
if you dont have an in-line remote then theres also the option of using a key remapper app (probably not on iphone) to let you change track by long pressing the volume buttons
However, the noise cancelling gap is real. I'd kill for wired IEMs with an inline battery + buttons, and noise cancelling mic & circuit in the earpieces.
Closest is the Sony cans, which have wired mode (ie: they have a tiny jack, so you can use them passively) but I don't think they cancel noise when using them that way
The utility has dropped tremendously though, now that headphone jacks have disappeared.
Would love to have a pair of "direct-USB-C" Etymotics.
I use wireless headphones and in fact never use this feature (I have it disabled). Too unreliable when there's a large screen with a big pause and skip button within reach.
Sadly have to disagree. I use Beyerdynamic though where you can order parts to repair em yourself, which i already did.
[edit] cannot recommend their wireless stuff produced in China, the worst i ever had. The big corded cans are still manufactured in Germany.