undefined

points

[-]

Sounds like this is just the external dimensions? That's mostly just useful for creating accessories. That's not too special, Apple does this too. https://developer.apple.com/accessories/dimensional-drawings...

by nvme0n1p119 hours ago|

parent|

[-]

Those PDFs are useless.

If you want a purple Steam Controller, you can load Valve's STL into your favorite slicer, 3D print a new shell, transplant the electronics, and you're done.

If you want a purple MacBook, could you do the same with those Apple PDFs?

by kube-system19 hours ago|

parent|

[-]

No, you can't, because it doesn't include any internal topology.

> This repository contains CAD files for the external shell (surface topology) of Steam Controller and the Steam Controller Puck

by whh15 hours ago|

parent|

[-]

If somebody wants to reverse engineer it all they have to do is buy one.

Then Apple's lawyers come for your liver.

Edit: spolling, I have a fever.

by bisby19 hours ago|

prev|

[-]

This is why I bought a 3d printer.

Headphone piece broke. Replacement was covered under warranty. Once. After that it was $30 a pop from amazon for the replacement part. Both of the parts provided under warranty (it was a set of 2) broke in the same way.

Figured if the parts break that regularly, I would wind up spending $500 in just a few years on replacement parts, might as well just get a printer. The part already had a model available (it was apparently a common issue), and the printed version hasn't broken yet.

I know nothing about making models, so the fact that the community already had the replacement part ready to print for me was a huge win, and Valve doing this basically guarantees that there will be a variety of "Controller stand, with puck slot" and replacement part prints available. HUGE win.

by bsimpson19 hours ago|

parent|

[-]

Fusion is a really cool tool to learn.

It's a flavor of 3D modeling called "constraint-based." You've heard the adage that if you give a million monkeys typewriters, eventually one will write something coherent? Constraint systems embody that same idea: There are infinite possible 3D models. You keep adding constraints until you narrow it down to only one possible solution that fulfills all of them.

by SAI_Peregrinus18 hours ago|

parent|

[-]

I've been learning FreeCAD, while it's still more frustrating than Fusion or SolidWorks it's much better than it used to be pre-1.1, and it's FOSS. Also constraint-based, I've been using the new spreadsheet view as the source of all constraint dimensions, with parts derived by binding to top, front, or right-side orthographic "master" sketches. Much like hand-drawn design, where you draw the orthographic views and use those directly to create an isometric view.

by parlortricks12 hours ago|

parent|

[-]

I love FreeCAD, designed some parts, did a bunch of Solidworks challenges and entered CAD comps.

I also love playing with build123d, dune3d (uses solvespace constraint) and SolveSpace.

Do love Solidworks but I'm on linux now so time to embrace the other options more.

by tdb789319 hours ago|

prev|

[-]

Large companies obviously are happy to screw their customers in various ways but I've had pretty good luck with smaller and especially more local businesses. I once had a jeweler gift me an ultrasonic cleaner when I asked them how best to clean a difficult to clean ring (presumably they had recently bought a new one).

Caring about the products they make and their customers seems like sorta the default for most people but large companies learn apathy eventually (or maybe it's mostly the companies that prioritize growth this way that become big). I wonder if less top down control at companies (especially by finance investors) would have them be better to consumers.

by gh02t19 hours ago|

prev|

[-]

This was always the dream for 3D printing, heck going back to classic Star Trek replicators and other science fiction. Granted, even with these models available it's kinda difficult to print large organic shapes like the main housing shells on most affordable consumer printers so I suspect there might not be too many people actually doing it. However, having the exact CAD files makes designing mods and 3rd party upgrades much easier.

by embedding-shape19 hours ago|

prev|

[-]

Going a step further, imagine hardware manufacturers noticing specific defects, then publishing new updated CAD files for a part that lasts better than the last, for customers who already have 3D printers to print their own upgrades/"patches".

by bluGill19 hours ago|

parent|

[-]

That can work, but 3d printing doesn't in general make for strong parts (layers). Most of the time you want some form of molding or CNC subtractive machining (either plastic of metal) - while some hobbyists have this, 3d printing is far more common. (and often easier)

by jandrese14 hours ago|

parent|

[-]

You might be surprised at how durable FDM parts can be if you know what you're doing, especially if you're willing to blow a some extra filament on making it solid. Orient the layer lines perpendicular to the sheer forces and it can be stronger than the original molded part.

by snovv_crash15 hours ago|

parent|

prev|

[-]

FDM in PLA/PETG sure, although recent advances have improved on this via things like brick layers.

Resin based printers are a whole different story though. They can make really durable parts. And even FDM with more advanced filaments have gotten competitive.