upvote
> A pocket-sized NAS that could plug into power and share a media library via wifi to nearby devices would be VERY useful.

This already exists. There are many portable WiFi APs out there. Some of them have a built-in battery or can be powered via USB so you can use some other portable power source (which could of course be one of your devices you want to connect via its AP), so you don't even need to have wired power to plug them into for short use.

The media sharing side isn't massively advertised as the main feature most want is to use them to share a cell connection (or another WiFi connection), and perhaps offer VPN access over that connection, but a number of them have USB ports that are cable of powering and mounting (depending on filesystem of course) an SSD so its contents can be shared via an HTTP interface or maybe a common file share protocol like SMB.

Even if direct media sharing is not supported, you can arrange that from one of the devices that you connect to the AP.

A quick search for “portable hotspot” and “travel router” finds no-name devices claiming 8-to-10 hours use time per battery charge (obviously take that with a pinch of salt!), just mobile->WiFi/WiFi->WiFi bridge or plain AP (no VPN or file sharing), for £17, and devices from more recognised companies for ~£30. Units with built-in VPN support (or running OpenWrt where you can probably add that yourself) start at more like £40 (GL.iNet devices claim OpenVPN and WireGuard support, I assume that is similar on other devices but you'd have to find more detailed specs than the sales page to check that). There are fewer offering built-in storage sharing than I expected but they are available (though with storage via SD or USB - I'm sure I've seen units with the option of an internal NVMe or SATA drive advertised but none came up in the first pages of my search results).

reply
I have tried some router options over the years without luck. They are not ready for a multi-user sharing scenario (10+ devices). It isn't the wifi but the USB interface that usually gives up, which is why I think an NVME option would be better. The one that actually worked was my home router. It was total overkill and much too big but could stream properly from usb to multiple devices.

It sounds petty, but even having to plug in a USB drive to an external port is not ideal as they break easily. I would prefer a barrel jack over an easily-broken USB-C (I have a couple barrel-USB-c adapters). Internal lithium batteries are a no-go due to flying/packing/mailing rules.

Ideal package: Something the size of a coke can, with only a power port, that can share a 1 or 2TB media library amongst 10-20 devices within a 50-foot range. No fiddly bits to break, no external drives. Something that could be dropped a couple times without issue. Encrypted file containers (veracrypt) and rocket.chat would be stretch goals.

Doing research in the last couple hours, some of the new rugged Pi cases with M.2 ports seem be the way to go.

reply
PirateBox was a project: https://en.wikipedia.org/wiki/PirateBox , but their website is gone now. I even have a TP-Link "3G modem with access point" that I got it to run on.

https://well-it-wasnt-me.github.io/PirateBox/

https://www.instructables.com/Raspberry-Pi-PirateBox/

reply
Just plug into android phone with adapter and run copyparty? not reliable enough?

[1] https://github.com/9001/copyparty

reply
I bought a travel router I’m really happy with. Haven’t used its USB port for storage but it says that’s supported:

https://www.gl-inet.com/en-us/pages/travel-routers

reply
I tried with a different travel router a few years back but the USB interface was a bottleneck. And I would like to keep everything in a single box. If I was going to revisit the project, there are some NVME options for the Pi but then I have to print a special case and the project gets big/expensive fast.
reply
Try it again? Things do change.

A Pi (or any other small-ish linuxey-type-thing) can work, but the built-in wifi isn't very good on a Raspberry Pi. A different wireless adapter connected to USB helps tremendously, but now: There are two boxes.

Consequently, it seems that there are always going to be two boxes (even if you print or find a special case) for any performant solution.

So if it's going to have two boxes, then: Why not put the big/fast storage in one little box, and the compute+fast wifi in another little box?

Something like a Beryl 7[1], maybe?

Diminutive box. Fast networking (wifi 7 with usefully-folding antennas, 2.5-gig ethernet). Runs from USB C with proper multi-voltage PD, so you can standardize on power supplies/chargers with the rest of your kit.

Has enough built-in storage and RAM to be a file server (512MB is still a ton for this job and I'm willing to die on this hill), and that internal storage is soldered so the fragility of MicroSD is eliminated. Quad-core, 2GHz. Can run official OpenWRT builds[2] if you prefer that.

It has USB 3 for external storage, which will be more than plenty to saturate a gigabit ethernet link (I'm also willing to die on this hill).

Plug in the SSD while in-use. Unplug when not in-use. Stow both in an inexpensive zippered travel case that's meant for that kind of thing[3].

Bonus: Connect SSD to a Real Computer whenever that's useful instead.

[1]: https://www.gl-inet.com/en-us/products/gl-mt3600be

[2]: https://openwrt.org/toh/gl.inet/gl-mt3600be

[3]: https://www.gl-inet.com/en-us/products/travel-gadget-organiz...

reply
The StationPC Pocketcloud is really nice, although pricy. It's got an SD card reader so you can incrementally back up photos from a camera (well, so long as your camera uses SD cards,) a built in battery so you van use it unplugged for a little while, and there is an optional dock that can hold a second NVME to back up what is on the device itself.

Again, pricy, but it is really nice as a photographer.

reply
>Question: Can I get one for a modern 2.5" SSD and/or NVMEs? >A pocket-sized NAS that could plug into power and share a media library via wifi to nearby devices would be VERY useful

This sounds like a job for any something-pi shaped device with PCIE port and AP capability. opi rv2 is pretty small, but I don't remember if it can do wifi ap

reply
No experience with it, but sounds like StationPC pocketcloud is near to what you're looking for.
reply
This is a real and kinda old product. Ive used it many times in this exact scenario. RAVPower FileHub
reply
Mine was `Monster Digital OTG Cloud NAS Wireless 802.11N Storage` ... 2000mAh battery, wifi, micro sd-card, and a HILARIOUSLY insecure linux system powering the whole thing. Certainly there's modern versions out there!
reply
SAME lol, apparently not. I looked around, noone is making modern versions of these types of gadgets.
reply
Wouldn't that be easier to just do with one of your devices?
reply