upvote
The parent comment is schematically correct. Right now each automaker uses its own quality standard for steel. So it’s non-trivial for a steel plant to supply materials to both Toyota and Honda.

Note that the scope of standardization is fairly limited at least for now. JAMA’s initial targets are steel, resins and wires.

reply
It's curious that the Japanese OEMs are so far behind on this.
reply
Are they? Western OEMs are jack welch asset light businesses that just assemble vehicles from tier 1 suppliers. A tier one supplier even owns the final assembly plant for one Mercedes model. All mercedes provides is the badge and mountains of paperwork.
reply
The german ones at least are very heavy on industry standardization, they have their own ISO/DIN-but-for-cars (VDA), which inspired equivalent standards now used by Chinese OEMs.
reply
[delayed]
reply
Industry standards are paperwork companies, which doesnt inherently imply they actually manufacture anything themselves. And usually standards are heavily tied into FMVSS or EPA regulations. Lots of busy work with nothing produced, but it sure employs a lot of politicians relatives.
reply
You mean the G-Wagon made by Magna Styer in Austria? If so, they are have always been made there.
reply
G-wagon has its own dedicated factory next to the ones owned by Magna.
reply
Semantics. Magna has been hand assembling / welding them them in Graz since 1979 using a network of Tier 1 suppliers. The whole engine is assembled by a single technician from start to finish, "one man one engine."
reply
Construction steel is a decent example of how this plays out. In the US almost every wide flange beam is rolled to the same spec, ASTM A992, so when I price a job I don't care which mill it comes from, and the service center can fill the order from whoever has stock. Before that became the norm around 2000 you'd see A36 and A572 Gr 50 on the same set of drawings and had to keep track of which was which. One spec didn't really concentrate supply. It made the material interchangeable, which is exactly what helps when one mill has a problem.
reply
But since there's only one supplier, they'll jack the prices way up and that will get passed to consumers.
reply
Not necessarily one supplier, but one design.

Toyota did that for years with their window switch assembly. You saw the same design on a Corolla and a Lexus, but the Lexus would have a nicer finish.

reply
But that is a single manufacturer selling to a single buyer. What is being described is a monopoly where a single manufacturer produces the parts for multiple customers. It's not the same situation.
reply
It is, but the scale is wider. If Honda adopts the Toyota window switch then they will switch to Toyota's supplier. Or Toyota will share the design with Honda's supplier and now both companies have two sources for the part.

I suspect the second scenario is the more likely, as the car makers have had long personal relationships with their suppliers and will prefer to work with them.

reply
Then one supplier buys the other and we're back to monopoly.
reply
That scenario can happen regardless if the parts are the same or not. This does not increase nor decrease the likelihood of that happening.
reply
AND… a standardized part reduces the friction against other players to compete in making the part.
reply
If the single manufacturer raises prices to increase their profits then a competitor can easily emerge and undercut them.
reply
Will they? Spinning up manufacturing of even a small part is quite expensive.
reply
deleted
reply
With JIT having evolved over time, there are usually at least two suppliers for every part and also absorption contracts (JIC / Just In Case). Same spec, dimensions, tolerances, QA parameters, etc. It insulates not only against unexpected supply chain issues but also monopoly pricing effects.

US manufacturing in the 1940s was very in tune with the multiple supplier method. Jeeps and Liberty ships still come up as examples for their broad production and interchangeable parts.

reply
> Jeeps and Liberty ships still come up as examples for their broad production and interchangeable parts.

This happened because the economy was on war footing and the government commanded it. Same reason Packard was making Rolls-Royce Merlin engines.

reply
Why on earth are you assuming this results in a single manufacturer? You have the the same number of manufacturers as before, producing the same quantity, it's just that what they're producing is according to a shared spec. Like, I dunno, AA batteries from Energizer or Duracell.
reply
Because most things in reality do not get produced that way. Even when it does happen, usually one manufacturer gradually buys all of the others.
reply
>If you have 10 suppliers all making the same wind screen wiper motor it's obviously better and cheaper than 10 suppliers all making different versions

That's a non sequitur. At least unless the whole world switches to the same standard or they all only had one customer to begin with. If those suppliers have to change, adapt or extend their production to accommodate a standard while still shipping their original product to other customers, the end result will be more expensive. And it would have done nothing to relieve the geopolitical issues brought up by the parent comment.

reply
They just might be doing very similiar things already but are just not allowed to do it that or the other way.

If you build things for A and B but they have both their own requirements and do their own tests, you might use similiar / same machines for steel etc. just switching recipes. Or your windshiledwhiper motor is the same but the casing for it is slightly different or the rating.

reply
Wait - you're saying that because they all change their product, that even though their market size jumps (they don't sell to one car manufacturer, they can sell to all) that that automagically increases costs?

Can I introduce you to peaks, troughs and shoulders?

You're likely to respond that the market stays the same, because its now split up by the wiper manufacturers that were creating specialised systems - fair.

Except nobody is ordering in an even cadence across the year, most orders will be higher at some points, and lower at others. And, the success of a given wiper manufacturer would be coupled hard to the success of the car (model[s]) they build for.

Now, the wiper manufacturers will be able to plan their output, coupled not to a given model(s) success, instead to the Japanese car industries success overall (less variable, still not deterministic though, to be fair)

That brings us to the peaks and troughs section - they dont have to have capacity for the peaks, which goes to waste (idle plant/staff) during the troughs, instead the other customers will fill the shoulders (more even output)

That's significant cost savings for the homogenised (wiper) manufacturers, with the one off cost of refitting their lines (which will be cheaper to do than normal because... multiple of them will be doing it...

reply
>even though their market size jumps

Why would it jump? Overall demand doesn't increase under the given assumptions. They'd be selling the same thing in a different form. Producing more forms costs more money.

reply
> (they don't sell to one car manufacturer, they can sell to all)

And also:

> You're likely to respond that the market stays the same, because its now split up by the wiper manufacturers that were creating specialised systems - fair.

> Except nobody is ordering in an even cadence across the year, most orders will be higher at some points, and lower at others. And, the success of a given wiper manufacturer would be coupled hard to the success of the car (model[s]) they build for.

Please try to have an honest read before misrepresenting posts.

reply