Note that the scope of standardization is fairly limited at least for now. JAMA’s initial targets are steel, resins and wires.
Toyota did that for years with their window switch assembly. You saw the same design on a Corolla and a Lexus, but the Lexus would have a nicer finish.
I suspect the second scenario is the more likely, as the car makers have had long personal relationships with their suppliers and will prefer to work with them.
US manufacturing in the 1940s was very in tune with the multiple supplier method. Jeeps and Liberty ships still come up as examples for their broad production and interchangeable parts.
This happened because the economy was on war footing and the government commanded it. Same reason Packard was making Rolls-Royce Merlin engines.
That's a non sequitur. At least unless the whole world switches to the same standard or they all only had one customer to begin with. If those suppliers have to change, adapt or extend their production to accommodate a standard while still shipping their original product to other customers, the end result will be more expensive. And it would have done nothing to relieve the geopolitical issues brought up by the parent comment.
If you build things for A and B but they have both their own requirements and do their own tests, you might use similiar / same machines for steel etc. just switching recipes. Or your windshiledwhiper motor is the same but the casing for it is slightly different or the rating.
Can I introduce you to peaks, troughs and shoulders?
You're likely to respond that the market stays the same, because its now split up by the wiper manufacturers that were creating specialised systems - fair.
Except nobody is ordering in an even cadence across the year, most orders will be higher at some points, and lower at others. And, the success of a given wiper manufacturer would be coupled hard to the success of the car (model[s]) they build for.
Now, the wiper manufacturers will be able to plan their output, coupled not to a given model(s) success, instead to the Japanese car industries success overall (less variable, still not deterministic though, to be fair)
That brings us to the peaks and troughs section - they dont have to have capacity for the peaks, which goes to waste (idle plant/staff) during the troughs, instead the other customers will fill the shoulders (more even output)
That's significant cost savings for the homogenised (wiper) manufacturers, with the one off cost of refitting their lines (which will be cheaper to do than normal because... multiple of them will be doing it...
Why would it jump? Overall demand doesn't increase under the given assumptions. They'd be selling the same thing in a different form. Producing more forms costs more money.
And also:
> You're likely to respond that the market stays the same, because its now split up by the wiper manufacturers that were creating specialised systems - fair.
> Except nobody is ordering in an even cadence across the year, most orders will be higher at some points, and lower at others. And, the success of a given wiper manufacturer would be coupled hard to the success of the car (model[s]) they build for.
Please try to have an honest read before misrepresenting posts.
(so, an EV without powertrain may have up to 30% less parts, or as many as 70% as an ICE. not like 10x less, at all. And this is before adding back in 7000 battery cells each made of few parts and the motor itself so... the parts count is actually the same? Interesting)
And you can also just standardize on the battery pack itself.
Chances are, the esoteric crap comes from one plant and has one major customer, so every bit is gonna be the same.
With USB-C cables, Who the fkkk knows what you'll get? The only bit guaranteed identical between two USB-C cables is the connector shape. Everything else is lottery.
At this point I think EU should introduce a mandatory labeling scheme for USB-C cables, so that each cable is stamped both on packaging and on the cable itself, with the very same stuff USB-C cable tester shows it. And since the "better" cables have chips on board, we could enroll them in the same "Battery Passport" / "Digital Product Passport" thing, with steep fines to all the importers or resellers who waste people's time selling fake cables.
Just mandate a resistor-style colored band for the modes / versions.
The failure was not realizing that physical indication of electrical spec would be necessary in a do-everything cable/connector spec.
Conversely - in the esoteric world, if the manufacturer is disinclined to produce "quality" - what exactly are you going to do about it?